Erroor Messages - Fora D40 Pro Manual Del Propietário

Erroor Messages

MESSAGE
Err 1
Inflation or pressure error.
Err 2
Err 3 Cuff pressure is too high.
Err 4
No pulse rate detected or
the pulse rate is too low.
Err 5
Systolic pressure is outside
Err 6 the system's measurement
range
Forced to stop the blood
Err 8 pressure measurement after
re-pump for 2 times.
Appears when the batteries
cannot provide enough
power for a test.
E-U Strip has been used.
Environmental temperature
E-t HIGH
is outside the system's
E-t LOW
operational range.
WHAT IT MEANS WHAT TO DO
Refit cuff tightly and
correctly. Relax and repeat
the measurement. If the
error still remains, please
contact local customer
service for help.
System measurement range
is 60 mmHg – 250 mmHg.
Review the instructions and
repeat the test. If the error
still remains, please contact
your healthcare professional
for help.
Turn off the device and start
over. Follow the instructions
and try again.
Replace or recharge the
batteries immediately.
Repeat the test with a new
test strip. If the meter still
does not work, please
contact the customer service
for assistance.
System operational range is
50°F to 104°F (10°C to
40°C). Repeat the test after
the meter and test strip have
reached the above
temperature.
39