Section 4: Product Selection - Falltech 7411 Manual De Instrucciones

avoid sharp edges which may damage your connecting device in
the event of a fall.
14. The FallTech Beam Trolley should never be used for foot-
level tie-off, nor should it ever be rigged for more than six
feet of free fall. Improper rigging could lead to forced
disengagement in the event of a fall. Always mount to the
bottom flange of a horizontal, overhead beam so that the Beam
Anchor is located above the level of the back D-ring on your Full
Body Harness at all times.
Once the above steps have been taken, the user will have access to
their work area while walking and moving at normal speeds. It is
important not to make sudden or dramatic movements! When using this
device, care must be taken to be aware of the work environment and any
hazards, obstructions or obstacles that may exist. Be careful of any and
all fall hazards and also be aware of slipping and tripping hazards as
well.

Section 4: Product Selection

Product selection is as important as the proper use of the product
itself. Poor judgment in product selection can have catastrophic results –
therefore be sure to consult a competent person to ensure that the
product that is issued is appropriate for the application and the specific
location for which it is intended.
Fig. 3.7
FallTech Beam Trolley (7710)
28