Urmet 1093/900 Guía Rápida De Configuración página 24

Assign IP cameras in the LAN network to NVR channels. The assignment can be automatically performed by
5.
pressing the button [Auto assign] (see the figure below and paragraph 4.1 for details) or manually (see par. 4.2).
6.
Once the cameras has been assigned to the NVR channels, scroll the channel list to the right (see figure below) to
check in the last column the cameras firmware version. If the firmware version is not recent (for Urmet Cloud
cameras the version 01.14.06.4371 or previous is not recent), update the camera firmware following the procedure
described in paragraph 5.1.
In order to avoid connection loss among NVR and cameras, it is suggested to assign a static IP address to
7.
cameras (see par. 4.3).
Check frame rate and bitrate settings for each NVR channel, as described in paragraph 5.3.
8.
The NVR is configured to automatically start the continuous recording of the cameras assigned to the channels.
9.
Check that the red icon R is displayed for each camera.
10. Once the network configuration has been completed, the NVR and the cameras can be remotely displayed by iOS
or Android smartphone by URMET iUVS application or from a PC station with Internet Explorer or UVS client
software. For further details see chapter 6 of this guide.
NOTE
NVR default password is 00000000. It is suggested to change the password at the first menu access in the page
[System → Users].
For further details see the instruction manual in the CD provided with the product.
DS1093-154A 24