Assign Static Ip Address To Camera - Urmet 1093/900 Guía Rápida De Configuración

Vr h.264 con hdmi, h.264 with hdmi nvr, nvr h.264 mit hdmi, nvr h.264 con hdmi, nvr h.264 avec hdmi
Ocultar thumbs Ver también para 1093/900:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

2.
Click on [Search] to find the IP cameras in the network.
3.
Select a camera from the list and fill in the empty fields on the right, i.e.: [Alias]: enter a name for the
camera and [Password]: enter the camera password (default: admin).
For IP Urmet Cloud cameras it is suggested not to change the default parameters in the fields [Port: 80]
and [Protocol: UrmetCloud].
4.
Click on [Add] and the camera will be online and its images will be displayed in the LIVE grid.
NOTE
Resolution, frame rate and bit rate depend on IP camera features.
For further details, see the instruction manual in the CD provided with the product.
4.3

ASSIGN STATIC IP ADDRESS TO CAMERA

If the IP camera has been configured in DHCP mode, it is suggested to change its address from dynamic to static, in
order to avoid connection loss between the NVR and the camera.
To change the camera addressing mode, access the NVR OSD menu (default password: 00000000), open the page
[Display → IP Camera] and click on the blue icon (circled in red in the figure below) of the respective channel:
DS1093-154A
27

Publicidad

Tabla de contenido
loading

Tabla de contenido