Cleaning And Maintenance Instructions - MO-EL INSECTIVORO 361 Uso Y Mantenimiento

Turn on the INSECTIVORO as early as spring or as soon as the first
troublesome insects appear.
MOUNTING UNIT TO THE WALL
Locate a suitable position: the wall should be free from obstructions
on the sides of the unit, to allow easy removal of the trap and filter for
cleaning; make sure there is an electrical outlet nearby and the area
is dry and protected from moisture.
On the wall where you plan to mount the appliance, make sure
that the wall is solid or that you locate a stud to provide ad-
equate support for the screw and that no electric wires or water
pipes are passing through.
1. Included with your INSECTIVORO is a special mounting bracket E
for mounting the unit to the wall. Remove the plastic wall anchor
from the screw .
2. Using a 5/16-inch drill bit, drill a hole 1.5 inches into the wall. Insert
the plastic wall anchor into the hole. Next screw the wall mount-
ing screw into the anchor.
3. Once the screw is securely mounted into the wall, hang the IN-
SECTIVORO by hooking the indentation in the plastic on the upper
lip of the back of the appliance onto the bracket.

CLEANING AND MAINTENANCE INSTRUCTIONS

Before cleaning make sure that the INSECTIVORO is discon-
nected from the wall socket.
Before switching off the unit or before removing the filter or
opening the drawer, make sure there are no dangerous insects
still alive inside. In this case, keep the unit powered ON until
they die.
Empty and clean out the trap I every few days. To clean it pull it out,
empty into trash and wash with running water. Please use caution
when emptying the drawer; make sure the insects (especially sting-
ing insects) are inactive.
The INSECTIVORO is equipped with a patented drawer cover G that
closes when it is removed from the device and opens when it is
9