To turn on the manual ignition oven.
(See features by model chart, at the end of the manual.)
Make sure that the oven
1
knob is in the off position.
Open the oven door and
2
locate the burner ignition
hole (see attached illustra-
tion).
Light a long kitchen lighter
3
or match.
Immediately after, approach
4
the flame to the burner
ignition hole.
Orificio de
encendido
Push in and turn the knob to
5
the 260 °C setting
Before removing the flame, wait
6
until the burner turns on and
make sure that flames are blue
by looking through the hole on
the oven floor.
Turn the knob to the desired
7
setting.
If the burner does not ignite,
8
turn the knob back to the off
position and repeat the
procedure from step 4.
Figure 1
56