PALSON Diábolo Plus Modo De Empleo página 27

GB
installing the docking station and recharging the robot
automatic recharge
1. Install the docking station securely on a flat
floor (attach to the wall using the docking station
adhesive).
2. There must be no obstacles or holes within 3
metres of the front of the docking station or 0.5m
to the left and right (See figure 1).
3. The robot cannot locate the docking station for
charging if the window for transmitting the infrared
signal from the charger is covered.
4. Connect the adapter outlet to the recharging
station connection. (See figure 2).
run the adapter power cable along the
wall as it could interfere with the brushes
or wheels.
automatic charge
The main unit will search for the docking station to charge automatically in case the battery runs low
during cleaning.
Manual charge
1. You can use the robotic vacuum cleaner
adapter or the docking station to charge the
main unit directly.
2. Connect the adapter outlet to the DC socket on
the main unit when charging with the adapter.
(See figure 3).
3. Before charging, connect the adapter to
the docking station making sure the robotic
vacuum is supported against the docking
station. (See figure 4).
4. When you want to charge the machine, press
CHARGE on the remote control. The machine will
locate the docking station within its radius of
action and will begin charging. (See figure 5).
figure 1
High voltage!
risk of electric shock! Dry hands
before using!
figure 2
High voltage!
risk of electric shock! Dry hands
before using!
figure 3
High voltage!
risk of electric shock! Dry hands
before using!
figure 4
27