Operating Information - PALSON Diábolo Plus Modo De Empleo

GB
Operating guide
Turn off/Cancel/Stop
OK button
FULL GO
CHARGE
▲ Forward button
▼ Backward
◄Turn left button
►Turn right button
1. The remote control must be used within a radius of 10 metres, otherwise you will
not be able to operate the unit.
2. The robotic vacuum may not locate the docking station when you press automatic
recharge if there is an obstruction, the battery is low or in more complex situations.
36
1. Press the robot on button. When the view function is in normal
mode, press this button to turn the robot on or off.
2. With the unit switched on, press this button to stop the device in
the corresponding mode.
3. When setting the programmable cleaning date and time, if the
setting is incorrect or you want to cancel it, press this button to
cancel the programmed mode and return to normal status.
4. Press and hold this button for more than 5 seconds; this will
erase the entire setting and return the unit to the default setting
After setting the configuration, press OK to save it.
After fully charging the battery, the machine will begin to clean
automatically on repeated occasions.
If you press this button when the robot is in stand-by mode or in
operation, the robot will search for the docking station to recharge
itself. When the robot stops working, it will stop recharging if you
press this button again.
By pressing "Forward", the robot will move forwards cleaning in
the direction of the arrow; press "off" to stop it. If it encounters and
obstacle, the robot will stop.
By pressing and holding "Backward", the robot will move backwards
cleaning in the direction of the arrow and will stop when you release
the button.
By pressing and holding the "Turn left" button for a few seconds,
the robot will turn anticlockwise until you release the button, and
will then move forwards in the indicated direction. Press "Off" to
stop the robot. If it encounters and obstacle, the robot will stop.
By pressing and holding the "Turn right" button for a few seconds,
the robot will turn clockwise until you release the button, and will
then move forwards in the indicated direction. Press "Off" to stop
the robot.
If it encounters and obstacle, the robot will stop.

Operating information