PALSON Diábolo Plus Modo De Empleo página 29

GB
installing/dismantling and cleaning the container
installation and dismantling
1. Remove the container by pressing
the button on the top. (See figures
1 and 2).
2. Press the red button on the top and
the fan will pop out automatically.
(See figure 3).
3. Turn the fan around, release the
two catches and open the cover for
cleaning. (See figures 4 and 5).
4. Pull the tab on the right hand
side towards you and the filter will
appear. (See figure 6).
5. Clean the filter or insert a new one,
press the semicircular bracket with
one hand to release the filter mesh
clips and remove the grill with the
other hand to clean it or to replace
it. (See figure 7).
6. Turn the container back around; to
remove the mop, release the right
and left clips on the bottom of the
container (See figures 8 and 9).
All parts must be replaced following
the dismantling steps in reverse
order.
Do not use the mop or pull bar on rugs or uneven floors.
figure 8
figure 1
figure 3
figure 4
figure 7
figure 9
figure 2
figure 5
figure 6
29