PALSON Diábolo Plus Modo De Empleo página 34

GB
Control panel instructions for use and operating mode
The following steps are very important: be sure not to press the wrong buttons on
the remote control!
1. You must recheck the code on the remote control or main unit when you change them after first
use or during maintenance.
2. Check that the battery in the remote control and in the main unit have sufficient charge; turn
off the main unit; press and hold OK on the remote control for more than 4 seconds and then
turn on the main unit without releasing the OK button. When you hear the robot beep twice, release
the OK button to complete the code test.
3. If you do not hear the beeps during code testing, repeat the previous steps.
34