Dictator DICTAMAT 50 KP Manual Tecnico página 13

1) Determination of the
Installation Position
- Preparing the
DICTAMAT 50 KP for
the Mounting
© DICTATOR TECHNIK GMBH Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail info@dictator.de • 1043
C) Installation of the DICTAMAT 50 KP
The DICTAMAT 50 KP is a compact unit with single pull rope with carrier
plate for mounting either from below to or in the rail, or from above on
top of the rail. It is appropriate only for single-leaf doors.
Mounting the DICTAMAT 50 KP
from below to the rail:
- either the carrier plate is nested
into the rail with the help of M5
screws and nuts, and washers if
necessary
- or the carrier plate is screwed
directly to the rail.
Mounting the DICTAMAT 50 KP
from above on top of the rail:
- the carrier plate is screwed from
above to the rail (see adjoining
illustration).
Normally the DICTAMAT 50 KP is mounted on that side of the rail where
the door is closed.
Depending on the mounting place or the closing direction of the door
you have to choose the corresponding DICTAMAT 50 KP.
The following illustration 3a shows the installation at the left end of the
rail, with a door closing to the left (DICTAMAT 50 KP left).
DICTAMAT 50 KP left,
part no. 700082
or 700087 (rustless)
Technical Manual
DICTAMAT 50 KP
Closing direction
of the door
Page 02.057.03
Ill. 2a
Ill. 2b
Ill. 3a