Central Unit; Central Unit In Detail; Background Lighting As A Status Display - Schwaiger SECURE-4-YOU Serie Manual De Instrucciones

USER MANUAL HG1000 532

4. CENTRAL UNIT

4.1. Central unit in detail

LCD display
RESET button
This is located in the battery compartment on the rear side of the central unit. With this button, the factory set-
tings can be reset. To do this, firstly press the
by the button.

4.2. Background lighting as a status display

The display lighting also serves as an additional status display. From here, the mode that the system is currently
in can be checked from larger distances.
Overview of the individual modes
ARM
Situation 1
One zone sets off the alarm in
Characteristics
• The alarm sounds for 1 minute
(Standard settings – can be set from 1-6 minutes)
• The alarm centre flashes red every 2 seconds
• The zone that is set off is shown in the display
through flashes
• The alarm is ended by the entry of a 4-digit PIN as
well as by additional confirmation with
HOME
Situation 1
One zone sets off the alarm in
Characteristics
• The alarm sounds for 1 minute
(Standard settings – can be set from 1-6 minutes)
• The alarm centre flashes red every 2 seconds
• The zone that is set off is shown in the display
through flashes
• The alarm is ended by the entry of a 4-digit PIN as
well as by subsequent confirmation with
Keypad
RESET button and then enter the standard PIN
ARM mode
HOME mode
Situation 2
Setting the alarm in ARM mode
Characteristics
• The siren is not set off
• The alarm centre flashes red every 5 seconds
(Display of the standby)
Situation 2
One zone sets off the alarm in
Characteristics
• A doorbell noise is set off
• The alarm centre flashes green every 2 seconds
• The zone that is set off is shown in the display
through flashes
• To end the doorbell noise, simply press
"1-2-3-4" followed
ALERT mode
19