Assembly Instructions For The Outdoor Siren; Assembly Instructions For The Movement Sensor; Assembly Instructions For The Door And Window Sensor With Magnetic Contact; Device Settings - Schwaiger SECURE-4-YOU Serie Manual De Instrucciones

USER MANUAL HG1000 532
6.1. Mounting instructions for the central unit
• The central unit is solely suitable for use indoors. No liability for subsequent defects can be undertaken in the
case of mounting in outdoor areas.
• The central unit has an integrated sabotage switch. This should prevent deactivation through removal of the
system.
• Ensure that, in the place of mounting the central unit, a plug is available and easily accessible.
• The place of mounting should not be directly next to heating, ovens or other large metal objects. These can
possibly lead to an impairment of the radio transmission.
• Before installation, check the suitability of the place of assembly and also check the mounting material. En-
sure that no electrical, water, gas or other connections are present at the mounting location.
• For the mounting of the central unit, use the drilling template which is supplied.
• Depending on your mounting location, additional/other mounting accessories may be required for mounting.

6.2. Assembly instructions for the movement sensor

• This product can be installed both in indoor and outdoor areas.
• It is recommended to mount the product in vulnerable spaces or directly next to possible break-in points.
• Do not mount the alarm unit directly next to ovens, air-conditioning units or other similar systems.
• Select the place of mounting so that there are very few or no hindrances (e.g. furniture or cupboards) in
what will later be the coverage area.
• Before installation, check the suitability of the place of assembly and also check the mounting material. En-
sure that no electrical, water, gas or other connections are present at the mounting location.
• Depending on your mounting location, additional/other mounting accessories may be required for mounting.
6.3. Mounting instructions for the door and window sensor with magnetic
contact
• It is recommended to affix the sensor unit directly on window or door frames and the magnetic contact
directly on the window or the door (moving part).
• This product is suited exclusively for use indoors. No liability for subsequent defects can be undertaken in the
case of mounting in outdoor areas.
• Please note that the markings on the device and the contact must be in a line and should be a
5 mm apart from each other, in order to ensure smooth functioning.
• The sensor can be mounted both on the left and on the right side.
7. OPERATION & INDIVIDUALISATION

7.1. Programming the 4-digit PINs

The Schwaiger "Green Guard"
used to protect the alarm system and to activate/deactivate the system. This PIN code can be adapted individ-
ually.
22
The ideal coverage
angle reaches
the product at an
assembly height of
1.8 – 2.4 m.
system has a standard PIN code,
Reduction Enlargement
of the area of the area
"1-2-3-4" when delivered. This PIN code is
maximum of