„ Do not expose the clamp to running water or spattering.
„ Do not use the clamp on uninsulated conductors at a potential exceeding 600 V with respect to earth.
„ Do not use the clamp on conductors of which the temperature > 90°C.
„ For DC measurements, make sure of the zero of the output. Adjust it if necessary.
„ During the measurement, make sure that the conductor is correctly aligned with the marks on the
jaws and the clamp is correctly closed.
If the conductors are not insulated, it may be necessary to wear PPE (Personal Protective
Equipment).
„ The MH 60 oscilloscope clamp includes a NiMH storage battery that must be recharged before any
prolonged storage.
1.2. Safety ............................................20
THE LEDS ................................................21
battery ............................................24
4.2. Cables ...........................................24
PRECAUTIONS FOR USE
CONTENTS
.22
.....23
5.2. Use ................................................25
the MH 60 ......................................32
8. WARRANTY ............................................33
19