Installation In The Vehicle - Be Cool atomic Manual Del Usuario

• comfortable but firm fit around your child.
• The harness straps are adjusted correctly.
• The harness straps are not twisted.
• The buckle tongues are engaged in the
• harness buckle.
3 .6 Removing the Baby Insert for
children over 5.5 kg
The CuddleMe baby insert with foam part is unsui-
table for children over 5.5 kg. In this case, you must
remove the CuddleMe baby insert or only the foam
part from the child seat.
Tip! The cuddleme baby insert can also be usedwithout
foam part for children over 5.5 kg.
Remove the foam part from the net pocket on the back
of the CuddleMe baby insert.
4

INSTALLATION IN THE VEHICLE

Please do not leave your child unattended in
the child safety seat in the vehicle.
For the protection of all vehicle occupants
IM 2093 ,00_ATOMIC.indd 43
In the case of an emergency stop or an accident
unsecured persons or
objects may cause injury to other vehicle occpants.
Please always check that...
The backrests of the vehicle seats are locked (i.e.that a
foldable rear seat bench latch is engaged).
All heavy or sharp-edged objects in the vehicle(e.g. on
the parcel shelf) are secured.
All persons in the vehicle have their seat belts fastened.
The child safety seat is always secured when it is in the
vehicle, even if no child is being transported.
To protect your vehicle
Some vehicle seat covers of sensitive materials(e.g.
velour, leather, etc.)
may develop wear marks when child seats are used.
This can be avoided by placing a blanket or towel under
the child seat.
4. 1 Installation of Group 0+/1 for the
children whose weight between 0-18kg
with ISOFIX and Top tether .
EN
43
20/2/19 17:16