Be Cool atomic Manual Del Usuario página 44

EN
IMPORTANT:
ISOFIX anchorings in the perpendicular intersection
of the vehicle seat back and seat cushion, and the
user-ready top theter anchoring behind the vehicle
seat. Tips: The user-ready theter anchorage usually
permanently installed on the inner rear luggage shelf
or on the vehicle floor. Details you could read your
vehicle guidelines or contact the vehicle manufacturer
Press the Base Detached Button while pulling Base
Detached Handle outward.
Then the Seat Base can be separated.
Pull the Release button and meanwhile pull the grey
belt to pull out two locking arms.
Grasp the child seat with both hands and slide the
two locking arms firmly into the insert guides until
the locking arms engage with a clicking noise on both
sides. The green safety button must now be visible on
both sides.
Pull the Release button and meanwhile push the child
seat towards the backrest firmly.
Shake the child seat to make sure it is safely attached
44 and re-check the green safety button to make sure
IM 2093 ,00_ATOMIC.indd 44
First please check if there are 2
that both of them are completely green.
Pull out the Top tether and press the Tether strap re-
lease button to extend the strap until it is long enough
to hook the User-ready tether anchorage behind, the
strap need to go through the Blue Belt Guide.
Hook the Tether strap hook onto the User-ready
anchorages. Check there maybe are 3 anchorages for
the hook, please find one in your favor.
Pull the Tether strap on another end back to tighten
the Top tether.
CAUTION:
• If the Top tether is tightened favorably and co-
rrectly, a green mark will turn up on the other end
of the Strap release button, please do check it.
4 .2 Installation of Group I for the chil-
dren whose weight between 9-18kg with
ISOFIX and Top tether.
Pull the Release button and meanwhile pull the grey
belt to pull out two locking arms.
Grasp the child seat with both hands and slide the
two locking arms firmly into the insert guides until
20/2/19 17:16