General / Application - Honeywell RZT 8000 Instrucciones De Instalación

Refurbishment Zone Transponder RZT 8000
1

General / Application

The third-party detector connecting module RZT 8000 (Refurbishment Zone Transponder) Part No. 80863x.10,
is used – in the same way as an esserbus
esserbus ® -PLus of the ESSER fire alarm control panels (FACPs). Service and programming software tools
8000 are used for programming.
®
Up to 100 esserbus transponders / third-party detector connecting module can be connected to one fire alarm
control panel. Up to 1.000 different control zones (e.g. relays) can be programmed in a FACP with the
programming software tools 8000.
In case of a malfunction (short circuit), the optional zone isolator (Part No. 788612) disconnects the zone
between two isolators. This does not affect the function of the other devices. Power for third-party detector
connecting modules is supplied via the FACP or external power supply. Two versions of the third-party
connecting module are available for connecting individual automatic fire detectors and manual control points
from other manufacturers.
Refurbishment Zone Transponder RZT 8000 (24 V DC)
Refurbishment Zone Transponder RZT 8000 (12 V DC)
The modules can be connected to the following ESSER fire alarm control panels, taking the system limits into
consideration:

FACP FlexES Control

FACP IQ8Control

FACP Compact
An overview of the RZTs that can currently be connected is provided in the download area at www.esser-
systems.com. Consult with Technical Sales before connecting any other types.
System limits

Max. 100 RZT 8000 per FACP. The total number of RZT and esserbus
connected to one control panel is restricted to 100 devices.

Up to 31 RZT 8000 can be combined into one separate zone on one loop.
Please refer to the RZT documentation during installation of the devices.
18
®
transponder – as an independent device on the esserbus
Part No. 808630.10
Part No. 808631.10
®
transponders that can be
FB 789807.10 / 05.17
®
/