Common Service Parts - Snapper NXT ENXT22875E Manual Del Operador

Tabla de contenido

Idiomas disponibles

Specifications

Mower

Deck Size (in)

Height of Cut (in)

Transmission Type

Ground Speed (mph)

Blade Torque (ft-lbs)

Engine

Engine Power (ft-lbs)

Engine Displacement (cc)

Fuel Tank Capacity (qt)

Oil Capacity (oz)

Spark Plug Gap (in)

Spark Plug Torque (in-lbs)

Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with

SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating perfor-

mance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at

3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among

other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which

engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not

develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference

is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel

pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine vari-

ability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for

this Series engine.

Snapper Products

535 Macon Street

McDonough, GA 30253