Jotul C 620 Instrucciones Para Montaje E Instalacion página 16

ENGLISH
Fig. 29
A
1. Remove the vent valves (A)
Fig. 30
1
1. Place the outside air adaptor with hose clamp on to the
bottom outlet of the cassette.
2. Make sure that the distance between the bottom outlet and
top of the adaptor is approx. 55mm. The adaptor should be
resting on the clamp.
Fig. 31
1. Place the inset back in the cassette.
16
55 mm
2
Fig. 32
1. Tighten the two nuts on the bottom of the burn chamber, to
secure it in the cassette.
The front bracket can now be reattached (see fi g.17).
Fig. 33
1. Secure the outside air adaptor in place with two 25 mm
screws from the inside of the burn chamber, with a 5 mm
Allen key. The screws are in the bag of screws.
Assemble all the parts back into the burn chamber, follow the
same procedure in reverse order.