Seiko V172 Instrucciones página 17

Troubles
The STOPWATCH hands do not
return to the "0" position when the
stopwatch is reset.
Although the alarm time has not
been set, the time on the alarm
sub dial and the time on the main
dial are not the same.
The inner surface of the glass is
clouded.
The date changes during the day.
32
Possible causes
Affected by external sources, or because the
internal IC had been reset, the stopwatch hand
positions have moved out of correct alignments.
The watch has been left close to an object
with a strong magnetic field. The watch has
been exposed to strong vibrations.
Moisture has entered the watch because the
gasket has deteriorated.
The time is set 12 hours ahead of or behind
the correct time.
Solutions
Adjust the STOPWATCH hands to the "0" position by following the instructions in
"SETTING THE TIME AND ADJUSTING STOPWATCH HAND POSITION"
Reset the time for main dial and alarm sub dial.
Contact the retailer from whom the watch was purchased.
Reset the time correctly, referring to "SETTING THE TIME AND ADJUSTING
STOPWATCH HAND POSITION"
• In the event of any other problem, please contact the retailer from whom the watch was purchased.
33