Waeco MS-BE6 Instrucciones De Montaje Y Uso página 26

Safety and installation instructions
Caution
e
To prevent the risk of short circuits, always disconnect the negative
terminal of the vehicle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should
also be disconnected.
Caution
e
Inadequate supply cable connections could result in short circuits,
causing:
– Cable fires
– The airbag being triggered
– Damage to electronic control equipment
– Electrical malfunctions (indicators, brake light, horn, ignition,
lights)
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
The following data must be reset, depending on the vehicle equipment
options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the corresponding
operating manual.
Observe the following installation instructions:
Secure the MagicSpeed components installed in the vehicle in such a way
that they cannot become loose under any circumstances (sudden
braking, accidents) and cause injuries to the occupants of the vehicle.
Make sure the driver does not have to reach through the steering wheel
to operate it.
To prevent damage when drilling, make sure there is sufficient space on
the other side for the drill head to come out (fig. 2, page 3).
26
MagicSpeed Accessory