Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Spacer plates below
bed corrugation.
BASE RAIL
BED
CORRUGATION
2 spacer plates must
be installed on each
carriage head bolt
and oriented in an
"X" shape.
6. Tighten the 5/8" hex nuts to 150 lbs.-ft.
7. Once the bed rails are square and the center bolt kit is properly installed you can start the
installation of the "HUSKY ROLLER".
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. See
for Warranty Information / Tech Support ©2014 Husky Towing Products Revision: June 03, 2014-REV 4
1 Spacer plate above bed corrugation &
1 spacer plate below bed corrugation.
2 spacer plates must
be installed on each
carriage head bolt
and oriented in an
"X" shape.
Figure 2
Page 5 of 42
BASE RAIL
BED
CORRUGATION
www.huskytow.com
Publicidad
Tabla de contenido
