Husky 32220 Instrucciones De Instalación página 6

#3
LATCH
PIN #1
Hole #1
Hole #2
1. Apply g
rease to ALL parts requiring grease. See Figure #3 for all areas requiring grease.
2. Slide short tube assembly #3 into Hole #1 of the driver side roller assembly #1 so that the latch pin #1
inserts into hole #2. See Figure #4.
3. Place the large flat washer #5 and the compression spring #6 on the end of short tube assembly #3 as
extends through the roller assembly. See Figure #5
.
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. See
for Warranty Information / Tech Support ©2014 Husky Towing Products Revision: June 03, 2014-REV 4
"HUSKY ROLLER" ASSEMBLY
GREASE
GREASE
Hole #3
Figure 5
#1
Page 6 of 42
Figure 3
LATCH PIN #2
#1
Figure 4
#5
#6
GREASE
REAR OF
TRUCK
Hole #4
#3
www.huskytow.com