Arregui FORMA B Manual De Instrucciones Y Garantía página 4

<EN>
3. CHANGING THE OPENING CODE:
The initial opening code for the safe is 1 2 3 4. To change it, proceed in the
following manner:
• Open the safe and do not close it until the process has been concluded.
• Introduce a blunt object (e.g. a pen) into the circular hole that is on the
back of the door, until it reaches its limit. The safe emits a long beep at
the beginning of the changing process.
• Enter the new code that you have chosen. Remember that it must have
a minimum of 1 and a maximum of 12 digits.
• Press the
• Enter your new code for a second time. This way the system checks
that there was no involuntary error the
• Press the
The safe will emit a continuous sound for acceptance, if the process
is completed correctly. If there has been an error it will emit four short
beeps. In this second case the opening code has not been changed and
you will have to repeat the process.
4. EMERGENCY OPENING:
Together with these instructions an envelope is provided which contains:
4.1. An emergency key:
For your convenience, this safe has an emergency key to open, which is
marked with a red dot on the key handle. If you forget your combination
code, insert the emergency key into the key hole and turn it clockwise
direction to open the safe.
This will manually open your safe at any time.
4.2. An emergency code:
In the event that you cannot remember your personal code, you can
open the safe by pressing this emergency code instead of your usual
one and following the steps indicated in part 2.
For your security we recommend not changing this code.
If you need to change it, follow these instructions:
• Open the safe and do not shut it until the process has been concluded.
• Press the
• Introduce the rod which is incorporated in the envelope into the circu-
lar hole that is on the back of the door, until it reaches its limit.
• Enter the valid emergency code (that which is in the envelope if it
is the
changed it).
• Press the
key.
key again.
key and then key 8.
change or that now programmed in if you have previously
key.
time it was entered.