Arregui FORMA B Manual De Instrucciones Y Garantía página 6

<EN>
BEFORE CALLING THE TECHNICAL SERVICE,
<< On pressing
light flashes; on keying in the
code a beep sounds with each
touch; but, on pressing
4 short beeps sound and the
light goes off.
<< You are pressing the keys
normally, but after a few
seconds, the light goes off and
the keys are not working.
<< You are carrying out the
opening process normally and,
when you press
nuous green light comes on but
after a few seconds it turns off
and you cannot turn the key.
<< The safe is emitting a beep
every 5 seconds and, when you
try to press any key the safe
will not work.
<< On pressing
comes on flashing.
<< After changing the batteries
the safe continues with the red
light instead of the green.
CHECK:
, the green
, the conti-
, the red light
< The entered code is incorrect,
try again.
< Too much time has passed bet-
ween pressing two keys. You have
a maximum of 15 seconds between
pressing two keys. After this time
the safe closes. Repeat the process.
< You have taken too long in tur-
ning the key or the handle. After
pressing you have 3 seconds to
turn the key or the handle.
< The safe is blocked, because
someone has keyed in an incorrect
opening code 5 times in a row.
Wait 15 minutes and the safe will
unblock automatically. Then you
can continue as normal.
< The safe is warning you that
the batteries are running out. The
safe is able to carry out several
openings after the appearance of
the red light. Even so, you should
not rely on this and should change
the batteries as soon as possible.
< It is usual that after opening
the safe for the
times after changing the batteries
the safe continues using the red
light. Check that it returns to using
the green light by carrying out
several consecutive openings. If
the problem persists check that
you have inserted the batteries
correctly.
two or three