TROUBLE-SHOOTING
Switch off the device before any procedure and unplug the power cable from the socket.
PROBLEM
The device
does not work
The device
does not nebulize
or nebulizes
insufficiently.
The apparatus is
noisier than usual
If after verifying the above mentioned conditions the device should not operate properly,
contact your trusted retailer or the nearest authorized service center.
ny
e
CAUSE
The power cable has not been
correctly inserted into the sock-
et of the device or the power
socket
The medication has not been in-
serted in the nebulizer
The nebulizer has not been
properly fitted.
The nebulizer nozzle is clogged
The air pipe is not correctly con-
nected to the device
The air pipe is bent, damaged or
twisted
The air filter is dirty
The Filter is not correctly
inserted in its housing
Correctly insert the power cable
in sockets.
Pour the right amount of medi-
cation in the nebulizer
Disassemble the nebulizer and
reassemble it correctly as shown
in the connection diagram on
the cover.
Disassemble the nebulizer, re-
move the nozzle and perform
cleaning operations Failure to
remove medication deposits
from the nebulizer affects its ef-
ficiency and operation.
Strictly comply with the instruc-
tions contained in the CLEAN-
ING, SANITISATION AND DISIN-
FECTION chapter
Ensure the device's accessories
are properly connected to the air
intake (see connection diagram
on the cover).
Unwind the pipe and ensure it is
not crushed or punctured. If nec-
essary replace it.
Replace the filter
Fully and properly insert the Fil-
ter in its housing
15
SOLUTION