STOK Island SGP2120N Manual Del Operador página 17

Fig. 22
CYLINDER
RETAINER
BRACKET
CYLINDER
TOP
COLLAR
Fig. 23
NOTE: Nipple must be centered in the cylinder valve.
Holding coupling nut and regulator as shown, turn cou-
pling nut clockwise and tighten by hand taking care not
to crossthread the connection. Do not use tools.
NOTE: The regulator will seal in the cylinder valve result-
ing in some resistance. An additional one-half to three-
quarters turn is required to complete the connection.
ASSEMBLY
LP GAS CYLINDER
WITH "GROWING"
BUBBLES
CYLINDER
BRACKET
MIDDLE
PEG
17
Fig. 24
CYLINDER
VALVE
Fig. 25
Fig. 26
If you cannot complete the connection, disconnect and
repeat the above two steps. If you still cannot complete
the connection, DO NOT use this regulator!
Inspect valve connections port and regulator. Look for any
damage or debris. Remove any debris. Inspect hose for
damage. Never attempt to use damaged or plugged
equipment. See your local LP Gas Dealer for repairs.
HANDWHEEL
CYLINDER
VALVE
PLASTIC
STRAP AND
CAP
REGULATOR
NIPPLE
CYLINDER
COUPLING
VALVE
NUT
REGULATOR