Assigned Protection Factors (Apf); Listing Of Components, Accessories And Replacement Parts - 3M BE-10 Serie Manual De Instrucciones

SPECIFICATIONS
Contact 3M Technical Service for additional technical specifications (e.g. weight, materials of construction).
Technical
Weight
Airflow range
Temperature range
Breathing tube assemblies
Visor
Head protection
Eye/face protection
Noise level
Hood fabric
Heat and flame resistance
Latex
Shelf Life

Assigned Protection Factors (APF)

3M supports an assigned protection factor (APF) of 1,000 for the BE-10, BE-10L and BE-10BR, which is consistent with the OSHA APFs defined in 29
CFR 1910.134. 3M Technical Data Bulletin #175 describes the test procedures and data supporting an APF of 1,000 for 3M™ Hoods and Helmets.
Technical Data Bulletins are available on the 3M web site, www.3m.com/workersafety. In Canada, follow CSA Z94.4 or the requirements of the
authority having jurisdiction in your region.

LISTING OF COMPONENTS, ACCESSORIES AND REPLACEMENT PARTS

Do not use with parts or accessories other than those manufactured by 3M as described in these User Instructions or on the NIOSH Approval Label for
this respirator. Do not attempt to repair or modify any component of the system except as described in these User Instructions. Failure to do so may
adversely affect respirator performance and result in sickness or death.
Part Number Description
BE-10-3 Hood, White, Regular, Made of Tychem® QC fabric (3/pack)
BE-10-20 Hood, White, Regular, Made of Tychem® QC fabric (20/pack)
BE-10L-3 Hood, White, Large, Made of Tychem® QC fabric (3/pack)
BE-10BR Hood, Butyl Rubber
529-02-37R10 Protective Overlay (for visor)
• BE-10 and BE-10L: Approx. 0.4 lb (181 g)
• BE-10BR: Butyl rubber hood: Approx. 1.6 lb (726 g)
• 6 to 15 cfm (170 to 425 lpm)
• 0 to 120 degrees F (-18 to 48 degrees C)
• Length: 25 in or 36 in (63 cm or 91 cm)
• Weight: approx. 0.5 lbs (227 g)
• Area 80 in (516 cm )
2 2
• Material
- BE-10 and BE-10L: clear acetate
- BE-10BR: PVC
• None
• None
• Less than 80 dBA (Excluding external noise)
• BE-10 and BE-10L – Made of Tychem
• BE-10BR - Butyl rubber
• The BE-10, BE-10L and BE-10BR hoods are not flame resistant and must not be used around heat, flames,
sparks or in potentially explosive atmospheres.
• BE-10BR hood has components containing natural rubber latex.
• BE-10 and BE-10L hoods do not contain components made from natural rubber latex.
• BE-10BR hood has a recommended shelf life of 10 years from date of manufacture when stored in accordance
with recommended temperature range.
QC fabric
®
8
(English)