Replacing The Print Cartridge - Fujitsu fi-565PR Guia Del Usuario

3.4. Replacing the Print Cartridge

Replace the Print Cartridge as follows:
• When the following message appears, replace
ATTENTION
the Print Cartridge as soon as possible.
• When installing or replacing the print cartridge,
be careful not to insert it out of place, If you
continue to print without replacing the cartridge,
your print output will continue to appear lighter
and lighter.
• When installing or replacing the print cartridge,
be careful not to insert it out of place.
1. Turn off the Scanner.
2. Open the cover by grasping the center of the Print
Cartridge Cover and pull it open while turning the
cover downward towards you, as exhibited below.
3. Pinch slightly the handles of the closing lever to
release it from its cartridge tray holder and turn it
upwards to open the tray holder.
Print Cartridge Holder
4. Remove the old Print Cartridge from the Print
Cartridge Holder.
5. Take the new Print Cartridge out of its pouch and
detach the protection tape from the Print
Cartridge.
Do not touch the metal part of the cartridge nor
ATTENTION
put the tape back again.
6. Insert the Print Cartridge in the holder with its tab
pointing to the right.
7. Lower the closing lever gently until it locks in and
fixes the cartridge in place.
fi-565PR Imprinter Operator's Guide | 11