Error Messages - Fujitsu fi-565PR Guia Del Usuario

5. Error Messages

The following numbers or letters on the Function
Number Display indicates a malfunction in the
imprinter.
Function Function
Description:
Document jammed in the imprinter.
How to solve: Remove the jammed documents referring to
3.5. Removing Jammed Documents
"
Function Function
Description:
The Imprinter cover or ADF cover is open.
How to solve: Close the Imprinter cover or ADF cover firmly.
Function Function
Description:
The print cartridge is not installed.
How to solve: Open the print cartridge cover and confirm that
the print cartridge is installed correctly.
Function Function
Description:
No document is detected in the imprinter.
How to solve: Confirm that document pages are sent
correctly into the ADF and no document has
jammed on the way.
Confirm that the character print position
designated by the scanner driver is not out of
the document page.
If document is not correctly sent into the ADF,
reset the document again.
If some documents are jammed on the way,
remove the jammed documents, refer to "3.5.
Removing Jammed Documents".
If the position designed to print letters is out of
the page sheet, set the position above the page
by the scanner driver.
16 |
Function
Description:
How to solve:
".
Function
Description:
How to solve: Contact the store where you purchased the
For other errors, refer to "fi-5650C Image Scanner
ATTENTION
Operator's Guide" included in fi-5650C User
Manual CD-ROM.
Function
A problem occurred to the Imprinter.
Open the print cartridge cover and confirm
that the print cartridge has been installed
correctly.
Turn off the scanner and then turn it on again.
(If the problem occurs again, contact the
store where you purchased the imprinter or
contact an authorized FUJISTU scanner
service provider.)
Function Function
The imprinter fuse has blown out.
scanner, or contact an authorized FUJITSU
scanner service provider.