Maytag WT-TOD Guía De Usuario página 5

SURFACE COOKING
Clock and Timer Control
NOTE: The display will flash when electrical power is first supplied to the appliance or if there has been a power failure.
TO SET THE CLOCK:
1. Press the Clock pad.
➢ A beep will sound when the
Clock pad is pressed.
2. Press or press and hold the More +
or Less - pad until the correct time
of day appears in the display.
➢Press to change the time in one
minute increments.
➢Press and hold to change the
time in 10 minute increments.
To recall the time of day when the
timer is displayed, press the Clock
pad.
TO SET THE TIMER:
The timer can be set from one minute
(0:01) up to 12 hours (12:00). The
timer does NOT control the oven.
1. Press the Timer pad.
➢ A beep will sound when the Tim-
er pad is pressed.
➢ 0:00 will appear in the display.
2. Press or press and hold the More +
or Less - pad until the correct time
appears in the display.
➢ Press to change the time in one-
minute increments.
➢ Press and hold to change the
time in 10 minute increments.
➢ Timer will start automatically after
a few seconds. The flashing
colon indicates that the timer is in
use.
➢ If the Clock pad is pressed, the
colon will continue to flash to indi-
cate the timer is in use.
3. A beep will sound at one minute
(0:01).
4. At the end of the timer operation,
0:00 will appear in the display and
three beeps will sound.
➢ One beep will sound every 10
seconds for 10 minutes or until
the timer operation is cancelled.
TO CANCEL THE TIMER:
Press the Timer pad and the current
time of day will reappear in the dis-
play.
NOTE: When 0:00 is displayed,
pressing either the Timer or Clock
pad will also cancel the timer opera-
tion.
4