Publicidad
Use
Device for installing a rear and/or front NTSC camera, 2 video signals using the original car monitor
The rear camera is activated automatically when reverse gear is engaged.
The front camera will be displayed for 10 seconds once reverse gear is disengaged.
Compatibility
MERCEDES NTG6 MBUX
Sprinter W907, (7" & 10.2 ") 2016>
Included
1 Control unit
1 power supply wiring
1 video signal wiring
1 LVDS wiring
Functions
Image Settings
The following settings can be made by pressing the MENU key:
- Screen brightness, contrast and saturation.
- Screen position horizontal / vertical
- Touch screen video 1 and video 2 input (rarely used).
- Guidelines and parking sensors. Only the R-guide is used in this interface.
Source selection
To switch from OEM to VIDEO 1 to VIDEO 2 and back to OEM, you can use the OEM key on the steering wheel
controls (CALL OFF - end call).
Alternatively, you can use the external switch provided to change modes.
Connections
WARNING
- Setting the switches with the control unit not powered.
- DIP1 ON: red ACC cable for the front camera, you will have 12 V when reverse gear is engaged and, for 10
seconds, when reverse gear is disengaged.
- DIP1 OFF: red ACC cable for the front camera will be powered only when reverse gear is engaged.
- POWER SUPPLY 12 V
THE "CALL OFF"
BUTTON IS USED TO
CHANGE THE SOURCE:
VIDEO1
VIDEO 2
OEM VIDEO
7
EN
Publicidad
