Heath Zenith SL-6155 Serie Manual De Instalación página 3

®
Your Heath /Zenith wireless chime has different selectable tunes: Ding (one
note), Ding-Dong (two note), or Westminster (eight note) (Available on se-
®
lected Heath /Zenith chimes). The factory setting is for the Ding-Dong tune
(or Westminster, when available). This tune can be changed by following the
instructions below.
• Ding (one note tune)
Push Button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Push Button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected Heath
chimes)
Push Button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may
purchase any Heath
recommend the back door use the Ding tune and the front door use the
Ding-Dong tune (or Westminster tune, available on selected Heath
chimes). Models that include two push buttons will come factory set for front
and back doors. Decals on the rear of the push button will indicate its setting.
Chime Volume
Control
Inside Chime
598-1000-05
Tune Settings
®
/Zenith wireless push button for a second entrance. We
Push Button Battery Replacement
Install an alkaline type A23 12 Volt battery. See dia-
gram inside push button for correct battery orientation.
Tune Setting
(Not used on
all models)
Inside Push
Button
Note: Some models might re-
quire the use of tweezers to re-
move and replace the jumpers.
-3-
* Code Settings 1-7
Must Match Both
Push Button and
Chime
Tune Setting
®
/Zenith
®
/Zenith