Bang & Olufsen BeoLink Manual De Usuario página 3

Room
Audio System
Setup:
The speakers are
connected to the
One
audio system
Room
No speakers are
connected to the
audio system**
Two
Rooms
Using a Beolink 1000:
Audio system: press SOUND, the
appropriate number (1, 2 or
0, and then STORE.
Video system: press PICTURE,
the appropriate number (1 or
2), and then STORE.
When these settings are carried out, you may proceed as
described in the guides for your audio and video systems
in order to adapt the setup to your room.
Audio System Video System
Option 1 Option 1
Option 0 Option 2
Option 2 Option 2
Using a Beo4:
Audio system: Hold the • button
while pressing LIST. When the
Beo4 display reads OPTION?,
press GO. Press LIST once to
display A.OPT. Then key in
the appropriate number (1, 2
or 0).
Video system: Hold the • button
while pressing LIST. When the
Beo4 display reads OPTION?,
press GO. While the display
reads V.OPT, key in the
appropriate number (1 or 2).
Basically, your integrated AV
system can be set up in two
ways (room setup):
– A setup with the audio system
and the video system placed
together in one room.
– A setup with the audio system
placed in one room, and the
video system placed in
another.
BeoLink system
Diagram 1: If you already have
an MCL based distribution
system, you now have access to
both the audio and the video
sources in your local rooms.
However, if you are planning to
install a distribution system, we
recommend that you choose a
BeoLink based system.
Diagram 2: If you already have
an MCL based distribution
system, you will need to install
an BeoLink/MCL converter as
well (please contact your Bang
& Olufsen dealer). However, if
you are planning to install a
distribution system, we
recommend that you choose a
BeoLink based system.
** In this situation, for optimal
sound reproduction, we
recommend that you connect a
set of active speakers to the
video system. For a BeoVision
Avant this requires a built-in
surround sound module.
3