Troubleshooting; Maintenance, Cleaning And Disinfecting; Storage, Disposal And Recycling; Limited Warranty - Permobil ROHO AGILITY Manual Del Operador

Troubleshooting

For additional assistance, contact a Permobil-authorized technician, distributor, or ROHO, Inc.
Not able to slide the Direct Mount Hardware all the way down on the AGILITY back shell.
Make sure the cover handle is either attached to the hook and loop fastener strip or tucked into the lower cover flap before sliding the Direct
Mount Hardware all the way down.
Not able to access the cap screw when installing AGILITY on the wheelchair.
Make sure the Direct Mount Hardware is in the lowest possible position on the AGILITY back shell.
Not able to tighten the cap screw while installing the AGILITY on the wheelchair.
Make sure that all four keyholes on the Direct Mount Hardware are engaged with all four pins on the wheelchair.
Warning: Tightening the cap screw does NOT necessarily mean that the Direct Mount Hardware is securely installed. The cap
screw can be tightened while the pins are NOT fully engaged in the keyholes. After tightening the cap screw, test for a secure
installation by pushing forward on the AGILITY (toward the front of the wheelchair). See the instructions for installing the Direct Mount
Hardware on the wheelchair.
Not able to attach the Direct Mount Hardware to the pins on the wheelchair.
- Make sure the wheelchair backrest cushion and backrest plate(s) are removed. Refer to the wheelchair manufacturer's instructions.
- Make sure the Direct Mount Hardware is not turned upside down. See the images in the installation instructions.
Not able to access a bolt when installing the Direct Mount Hardware on the AGILITY.
If a bolt is not visible, reach your hand between the cover and the back shell and push the bolt until it protrudes through the slot. Attach the
washer and the lock nut.

Maintenance, Cleaning and Disinfecting

Warning: DO NOT continue to use the product if any part is broken, cannot be tightened, or is not functioning properly.
Periodically, the product should be thoroughly inspected by a Permobil-authorized technician.
Check daily to confirm the tightness of screws and hardware. Re-tighten loose screws, following the instructions in this manual. Check
components daily for wear or damage and replace if necessary.
Warnings:
- Cleaning and disinfecting are separate processes. Cleaning
must precede disinfection. Before use by a different individual:
clean, disinfect, and check product for proper functioning.
- Follow safety guidelines on the chemical containers.
= Wipe with damp cloth
Component: Back shell, Direct Mount Hardware
To Clean: Hand wash in warm (40°C) water with soap and a sponge. Rinse with clean water. Wipe dry with a clean cloth
and then allow to air dry completely.
To Disinfect: Wipe gently with a cloth dampened with a household disinfectant. Rinse with clean water. Wipe dry with a
clean cloth and then allow to air dry completely.

Storage, Disposal and Recycling

Storage: Clean and disinfect the
product before storing. Store
the product in a container that
protects the product from moisture,
contaminants and damage.

Limited Warranty

Limited Warranty Term, from the date the product was originally purchased: AGILITY Direct Mount Hardware: 60 months. See also the Limited
Warranty supplement provided with your product, or contact Customer Care.
ROHO AGILITY Direct Mount Hardware Operation Manual
Disposal: The components of the products in this manual
are associated with no known environmental hazards when
properly used and when disposed of in accordance with all
local/regional regulations. Incineration must be performed
by a qualified, licensed waste management facility.
Cautions:
- DO NOT use abrasives such as steel wool or scouring pads on the
product.
- DO NOT use cleaning products containing petroleum or organic
solvents [i.e. acetone, toluene, Methyl Ethyl Ketone (MEK),
naphtha, dry cleaning fluids, adhesive removers] on the product.
13
Recycling: Contact a local recycling
agency to determine recycling options
for the product. For more recycling
information, contact ROHO, Inc.