Quick Start Guide; Important Warnings: Read Before Installing - Permobil ROHO AGILITY Manual Del Operador

Quick Start Guide

First: Read all safety information.
Then: Install the AGILITY on the wheelchair using the Direct Mount Hardware. Make sure to
adjust the height of the AGILITY and, if necessary, adjust the power recline limits.
STOP: If the Direct Mount Hardware is NOT installed on the AGILITY, stop here and refer to
"Separately Purchased AGILITY - Installation of Direct Mount Hardware" in this manual.

Important Warnings: Read Before Installing

Qualified To Perform Tasks
The product should be installed, adjusted
and removed by a Permobil-authorized
technician or a clinician. If the technician
or clinician is unable to perform any tasks
in this manual, they should seek assistance
by contacting their distributor or ROHO, Inc.
Lock the Wheels
The wheels on the wheelchair MUST be
locked before installing, adjusting or
removing the AGILITY and/or the Direct
Mount Hardware from the wheelchair.
Power Off the Wheelchair
The wheelchair MUST be powered off
before installing, adjusting or removing the
AGILITY and/or the Direct Mount Hardware
from the wheelchair.
Tighten All Hardware
If the hardware is not securely tightened,
the AGILITY may shift up or down during
operation, which may reduce or eliminate
the product's benefits. After installation
and adjustment is complete, and before
operating the wheelchair, make sure all
hardware is securely tightened. Refer to
the recommended torque specifications.
Dropping, Pinching, Crushing Risk
The AGILITY with Direct Mount Hardware
is heavy. To avoid injury, hold securely
and use extreme caution when installing,
adjusting, removing or otherwise handling
the AGILITY with Direct Mount Hardware.
Ask for assistance if needed.
ROHO AGILITY Direct Mount Hardware Operation Manual
Confirm the Correct Height
If AGILITY is removed from the wheelchair
for any reason, it must be reattached at
the prescribed height. Before removing the
AGILITY, mark the height of the back shell
(using tape or a marking pen) to ensure the
product is correctly reinstalled. Follow all
instructions in this manual to reattach the
AGILITY to the Direct Mount Hardware and/
or the wheelchair.
Interference During Recline
Interference during recline may result in:
the AGILITY backrest slipping or instability;
injury to the user; damage to the AGILITY
or to accessories attached to the AGILITY;
or damage to the wheelchair. Check for
interference during recline when: 1)
installing the AGILITY for the first time, 2)
adding any accessories to the AGILITY, or
3) making any adjustments to the height
of the AGILITY. For reprogramming or
adjustments to the recline angle range,
consult with a Permobil-authorized
technician.
Use the AGILITY Cover
The AGILITY Cover should always be used
with the AGILITY. Refer to the ROHO AGILITY
Back System Operation Manual provided
with the AGILITY.
While installed on the wheelchair, the bottom
handle of the AGILITY Cover should NOT
hang down where it could become caught
in the wheelchair components. The bottom
handle should be attached to the cover
with the hook and loop fastener strips or it
should be tucked into the lower flap.
5
Check Skin Frequently
Skin/soft tissue breakdown can occur
due to a number of factors, which vary by
individual. Check skin frequently, at least
once a day,especially those areas covering
bony prominences. Redness, bruising, or
darker areas (when compared to normal
skin) may indicate superficial or deep
tissue injury and needs to be addressed.
If there is any discoloration to skin/
soft tissue, STOP USE immediately. If the
discoloration does not disappear within 30
minutes after disuse, immediately consult a
healthcare professional.
Center of Balance
Attaching any object, including the AGILITY
Direct Mount Hardware with or without the
AGILITY, will add weight that may affect
the wheelchair's center of balance. Check
with a Permobil-authorized technician
or a clinician to determine whether the
wheelchair should be modified. Proceed
with extreme caution if the AGILITY has
been installed: The wheelchair's center
of balance can significantly affect the
stability, operation and safety of the
wheelchair; if the wheelchair becomes
unbalanced, injury to the user or damage
to the wheelchair may result.