Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Bluetooth
wireless technology
®
SPEAKER OPERATION
To connect to the Broan-NuTone Bluetooth® wireless technology Speaker for the rst time:
1.
To play your personal music or audio files, you need a Bluetooth wireless technology enabled
Smart Phone, Tablet, or any other such
2.
Set your device to a low-to-midrange volume before connecting to the speaker.
3.
Make sure Fan is ON and Bluetooth
ters (approximately 33 feet) of the Speaker/Fan.
4.
Pairing your
Bluetooth
wireless technology enabled device with the Speaker:
®
a.
For iPad/iPhone/iPod touch:
i.
From your iPad/iPhone/iPod touch home page, tap Settings.
ii.
From Settings, tap General (if you have iOS 7 or greater, you can skip this step).
iii.
From General, tap Bluetooth.
iv.
Move the
Bluetooth
a list of discoverable
v.
The Broan-NuTone Speaker has the
This identifier should be in the list of Discoverable Devices. If not, turn the Fan
OFF, then ON, then turn
•
If "Sensonic™ Vent Fan" is still not on the list, consult with the owner's manual
for your device and follow the procedure for Pairing/Connecting a
wireless technology device.
vi.
Tap on "Sensonic™ Vent Fan" to complete the pairing of the
technology Speaker with your Apple device.
b.
For Android Phone/Tablet:
i.
From your smart phone/tablet home page, tap Settings.
ii.
From the Settings menu, go to Wireless & Controls, Wireless & Networks, or
something similar.
iii.
Find Bluetooth
®
move Bluetooth
iv.
On the
Bluetooth
thing similar.
v.
The Broan-NuTone Speaker has the
This identifier should show up in the list of Available Devices. If not, turn Fan OFF,
then ON, and repeat pairing procedure.
If "Sensonic™ Vent Fan" is still not on the list, consult with the owner's
•
manual for your Android device and follow the procedure for
Pairing/Connecting a
Tap on "Sensonic™ Vent Fan" to complete the pairing of the
vi.
technology Speaker with your Android device.
c.
For all other
Bluetooth
i.
Follow the instructions that came with your
Phone, Tablet or Pad device to set it to search for
accessories.
ii.
Most
Bluetooth
"Paired Devices" (or similar) screen and SELECT "Search for Devices" or something
similar.
iii.
The Broan-NuTone Speaker has the
This identifier should show up in the list of Available Devices, Discoverable Devices
or similar. If not, turn Fan OFF, then ON, and repeat pairing procedure.
5.
Open up the audio program on your device and play your music or other audio files. The audio file
should play over the Bluetooth
6.
When done playing/listening to your audio files, disconnect from the Speaker by either turning OFF
the fan, disconnecting Bluetooth
or simply walking away. The Bluetooth
the device is out of range of the Speaker, which should occur when device is approximately 10
meters (33 feet) away from the Speaker.
To connect to the Bluetooth
wireless technology Speaker each subsequent time
®
(after initial connection is made):
1.
The Sensonic™ Speaker can only play audio files from one Bluetooth
ogy device at a time, therefore one device must be DISCONNECTED (but not necessarily
UNPAIRED) before using the Speaker with another device.
2.
If your Bluetooth
wireless technology device was DISCONNECTED but not UNPAIRED
®
from the Speaker last time it was used, then it should automatically connect next time
the device is within range of the Speaker, unless the Speaker is already CONNECTED to
another device.
a.
If your device does not CONNECT automatically with the Speaker, then find your
"Paired Devices" or similar list and TAP on "Sensonic Vent Fan" to reconnect with
the Sensonic™ Speaker.
3.
If your Bluetooth
wireless technology device was UNPAIRED from the Speaker after the
®
last time it was used, you must follow the connection procedure in the previous section for
PAIRING your device with the Speaker.
4.
Open up the audio program on your device and play your music or other audio files. The
audio file should play over the Bluetooth
5.
When done playing/listening to your audio files, disconnect from the Speaker by either
turning OFF the fan, disconnecting Bluetooth
(Smart Phone, Tablet, etc) or simply walking away. The Bluetooth
will automatically disconnect when the device is out of range of the Speaker, which should
occur when device is approximately 10 meters (33 feet) away from the Speaker.
device.
wireless technology enabled device is located within 10 me-
®
Slider to ON/green (if it isn't ON already). When you do this,
®
Bluetooth
wireless technology devices will appear.
®
Bluetooth
identifier "Sensonic™ Vent Fan".
®
Bluetooth
OFF, then ON.
®
, Bluetooth
Settings or something similar and tap Bluetooth
®
Slider to ON (if it isn't on already).
®
screen, tap "Scan for Devices", "Search for Devices" or some-
®
Bluetooth
identifier "Sensonic™ Vent Fan".
®
device.
Bluetooth
®
wireless technology enabled devices:
®
Bluetooth
wireless technology enabled devices will require you to go to the
®
Bluetooth
identifier "Sensonic™ Vent Fan".
®
Fan Speakers.
®
wireless technology from your device (Smart Phone, Tablet, etc)
®
wireless technology will automatically disconnect when
®
wireless technology Fan Speakers.
®
wireless technology from your device
®
Bluetooth
®
Bluetooth
wireless
®
or
®
Bluetooth
wireless
®
wireless technology enabled
®
Bluetooth
wireless technology
®
wireless technol-
®
wireless technology
®
TYPICAL INSTALLATIONS
Housing mounted to joists.
Housing mounted to I-joists.
Use I-joist spacer block (provided).
Housing mounted to truss.
To mount housing anywhere between joists, i-joists or
trusses, use optional hanger bar kit QTHB1 (sold sepa-
rately). Follow mounting instructions included with kit.
MODEL SPK110
Page 2
Publicidad
Tabla de contenido
