En Original Instructions; Declaration Of Conformity; Specified Use; General Safety Instructions - Metabo MAG 28 LTX 32 Manual Original

Original instructions

1. Declaration of Conformity

We declare under our sole responsibility: These
cordless magnetic core drills, identified by type and
serial number *1), comply with all relevant
requirements of the directives *2) and standards
*3). Technical file at *4) - see page 3.

2. Specified Use

The magnetic core drill is designed for core drilling
using suitable cutting edge tools and for drilling
metal using twist drill bits.
The magnetic drill stand is used to secure the drill to
flat and cylindrical (diameters of 90 - 300 mm)
magnetisable metal surfaces. It must adhere
perfectly to the surface.
When used with the securing strap provided, it is
also suitable for working on vertical and angled
surfaces.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.

3. General Safety Instructions

WARNING – Reading the operating
instructions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Before using the power tool, carefully read through
and familiarise yourself with all the enclosed safety
information and the Operating Instructions. Keep all
enclosed documentation for future reference, and
pass on your power tool only together with this
documentation.

4. Special Safety Instructions

For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
For work carried out on angled and vertical
surfaces and overhead, the magnetic drill
stand must be secured with the securing strap
supplied to prevent it from falling if the magnet
malfunctions.
If the magnet malfunctions, the machine performs a
dangerous swinging movement.
Always wear a hard hat when working overhead.
Always wear protective goggles, gloves, and
suitable shoes when working.
The magnet produces magnetic fields that can have
a negative effect on medical implants.
The surface for the magnet must be clean and flat.
The magnet holding power depends on material
thickness and condition.
Paint, zinc and oxide layers reduce the magnet
holding power.
Do not expose the machine to rain and do not use in
wet or potentially explosive rooms.
Follow the instructions for lubrication and tool
replacement.
Keep the handles dry, clean and free of oil and
grease.
Caution! The use of other tools and accessories can
result in a risk of injury.
Use the handle (2) on the magnetic drill stand when
transporting the machine.
Always wear a safety harness when working
on scaffolds.
Wear ear protectors.
Wear protective goggles.
Danger - magnetic field.
Persons with pacemakers prohibited.
4.1 Safety instructions for battery packs:
Protect battery packs from water and
moisture!
Do not expose battery packs to naked flame!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Slightly acidic, flammable fluid may leak from
defective Li-ion battery packs!
If battery fluid leaks out and comes into
contact with your skin, rinse immediately
with plenty of water. If battery fluid leaks out
and comes into contact with your eyes, wash them
with clean water and seek medical attention
immediately.
Remove the battery pack from the machine before
any adjustments, conversions or servicing are
performed.
Before fitting the battery pack, make sure that the
machine is switched off.
ENGLISH en
11