Kohler K-1652 Guia De Instalacion página 5

Control
Kit
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Steam
Head
K-1569/K-1669
21"
(53.3 cm)
Control
Kit
4-1/2"
Steam
(11.4 cm)
Head
60"
6"
(152.4 cm)
(15.2 cm)
K-1681/K-1683
Steam Hardware Locations
WARNING: Risk of scalding. Do not locate the steam head near a seat or bench, as the steam head
is hot during operation and may scald the user if touched.
NOTICE: It is recommended to locate the control kit and steam head on the same wall as the plumbing
controls. For optimum performance, do not locate the control kit directly above the steam head. Locate the
steam head 6" (15.2 cm) above the floor and a minimum of 4-1/2" (11.4 cm) from the threshold. The steam
head should always be located as far away from the seating area as possible.
Identify the model number of your shower module in the illustration. If necessary, consult the
Homeowners Guide included with your shower module to verify the model number. If the
roughing-in dimensions for your particular model is not shown, refer to the "Custom Shower
Applications" portion of the illustration.
Determine the location of the control kit and steam head based on the roughing-in dimensions
illustrated. Dimensions given in the rough-in information are crucial for proper installation.
Locate the control kit and steam head in the location indicated. All measurements are from the
inside of the module.
Kohler Co.
12"
(30.5 cm)
6"
(15.2 cm)
Steam
Head
Drain
End
Control
Kit
11"
(27.9 cm)
60"
(152.4 cm)
Steam
6" (15.2 cm)
Head
K-1687/K-1688
4-1/2"
(11.4 cm)
60"
(152.4 cm)
Drain
End
K-1682/K-1684
5
21"
(53.3 cm)
Steam
Head
Custom Shower
21"
Applications
(53.3 cm)
Control
Kit
Steam
Head
6"
(15.2 cm)
4-1/2"
(11.4 cm)
Min
6" (15.2 cm)
from floor
Threshold
1008019-2-K