Troubleshooting Guide - Kohler K-1652 Guia De Instalacion

6. Operate the Steam Control
Steam Control Operation
NOTE: The clock is always displayed in the LED window when the steam is not in use.
NOTE: The next time the unit is turned on, the steam duration and temperature settings will be based
upon the previous user settings. The default setting for a new control unit is 113°F (45°C) for 20 minutes.
To start the unit: Press the ON/OFF button to start the steam. The green LED light on the button
will illuminate. "On" will be displayed in the LED window until the temperature reaches 90°F
(32°C). The current temperature is displayed until the target temperature is reached.
To stop the unit: Push the ON/OFF button again to stop the steam. The green LED light on the
button turns off and the LED window displays "Off" for 5 seconds, then returns to the time of day.
Steam Control Adjustments
Make sure the steam control unit is turned ON before making any of the following adjustments.
Press the ON button to activate the steam control unit.
To adjust the steam temperature: Push the TEMP button. The LED window flashes the temperature
from the previous user. Press the up arrow to increase the temperature and the down arrow to
decrease the temperature. After 5 seconds, the flashing will stop and the current temperature will be
displayed as it changes to the target temperature.
To change the temperature scale: To toggle the temperature reading between Fahrenheit and
Celsius, push and hold the TEMP button for 3 seconds.
To set the timer: Push the TIMER button. The LED window flashes the previous setting. Press the
up or down arrows to adjust the setting. After 5 seconds, the flashing stops and the timer setting is
displayed.
To adjust the clock: Push the CLOCK button. The LED window flashes the current time of day
setting. Press the up or down arrows to adjust the clock. After 5 seconds, the flashing stops and the
set time is displayed.

Troubleshooting Guide

The troubleshooting guide is for general aid only. For service and installation issues and concerns, call
1-800-4-KOHLER.
Symptoms
"Err 1" appears on the
1.
control pad.
"Err 2" appears on the
2.
control pad.
1008019-2-K
Increase
Clock
Timer
Probable Causes
A. The power button is stuck.
A. "Up button" is stuck.
12
Window
Decrease
On/Off
Temperature
Recommended Action
A. Reset the power at the breaker.
A. Reset the power at the breaker.
Kohler Co.