Configuring The Wattmeter - Ingeteam INGEREV SMART DLM Manual De Instalación Y Configuración

Idiomas disponibles

INGEREV SMART DLM

4.3 Configuring the wattmeter

Configuration of the wattmeter for the correct operation of the SMART DLM.

1. Power the wattmeter from the electricity

grid.

2. Turn the switch to position 1.

3. Access the configuration menu by

pressing the joystick for 3 seconds. An

access code will be requested. This code

is 0, by default. Once you have entered

the code, press the joystick once to

accept.

4. This gives you access to the password

configuration screen CNG PASS. We

would advise you not to change the

password and to move the joystick to the

right to go to the next screen.

5. APPLICAT application type screen. In this

screen, you need to select application

type H. To do so, press the joystick once.

PRG will appear at the bottom of the

display, indicating that it is possible to

change the value.

Move the joystick in any of the 4 directions

until TYP.H appears. Press the joystick

once to accept

ABW2012IQM01_.docx

Ingeteam

Tabla de Contenido