Publicidad
Idiomas disponibles
Idiomas disponibles
INGEREV SMART DLM
1 Information on this manual
This manual aims to describe the characteristics and use of the INGEREV SMART DLM system, as
well as its connection and configuration for start-up.
1.1 Scope, nomenclature and icons
This document will generically refer to the units for charging electric vehicles with the term "Charging
point" or "CP", to the INGEREV SMART DLM 2.0 as "SMART DLM" and to the installation as "system"
or "plant".
The following icons will also be used to identify the various devices present in an installation.
Power Grid
1.2 Target audience
The connection of the installation is directed at qualified personnel. Qualified personnel, as referred to
in this manual, means personnel who at least meet the requirements of all safety standards, rules,
regulations and legislation applicable to the equipment installation and operating tasks for all the
elements in the installation.
The responsibility for appointing qualified personnel shall always fall to the company employing the
said personnel. This company must decide which worker is suitable for each specific task, in order to
maintain worker safety and comply with all occupational safety legislation.
The said companies are responsible for providing their personnel with adequate training in work with
electrical equipment and for ensuring that such personnel is familiar with the contents of this manual.
1.3 Symbols
Different symbols will be used throughout this manual, in order to emphasise and highlight certain texts. The
general meaning of these symbols is explained below.
General warning.
Electrical hazard.
ABW2012IQM01_.docx
Wattmeter
General information.
Read the section indicated.
Ingeteam
Charging Point
EN
ES
FR
IT
3
Publicidad
Capítulos
