General Safety Instructions - Ivoclar digital PrograMill Dry Instrucciones De Uso

PrograMill Dry – General safety instructions
2 General safety
instructions
DANGER
Incorrect operation of the machine
Before installing, maintaining and operating
the machine, read all documents provided
with the machine.
If it is unclear how to operate the machine in any
way, do not use the machine and contact your ser-
vice partner.
Ensure that every user has access to the operating
instructions.
Instruct every user on safe and proper machine
handling.
Danger to life due to an electric shock
If you come into contact with electrically
charged parts, you can suffer from an electric
shock. Water increases the risk significantly.
Do not remove the housing of the machine.
Only have qualified electricians work on any elec-
tric equipment.
Ensure that an operational Residual Current
Device / Ground Fault Circuit Interrupter is installed
on the electric circuit of the machine.
Run power cables so that they cannot be damaged
by sharp edges.
Before switching on the machine, check power
cables for damage.
Before unplugging the power cable, switch off the
machine at the main power switch.
In the following cases, disconnect the
machine from the electrical source imme-
diately and prevent it from being restarted:
When machine connections or electric cables are
n
damaged
Before you check or run electric cables
n
Replace damaged cables with original man-
ufacturer's spare parts.
Never perform any troubleshooting while the
machine is operating.
Only have authorized service partners repair the
machine.
Do not touch the machine with wet or damp hands.
Never put any machines or devices which are
Respiratory diseases when processing harmful
materials
If you inhale harmful materials during their processing,
your respiratory tracts may be damaged.
Crushing hazard and risk of cutting injuries through
moving machine parts
Through the moving axes and the rotating spindle you
can suffer bruises and cuts.
Service mode: Risk of cutting injuries and bruises as
well as hazards through ejected debris
If you operate the machine in any "Service Mode" with
the working chamber door open, the risk of injury is
increased significantly.
Operating Instructions: PrograMill Dry
Version: 2/19/2021
powered by electricity under the machine.
Do not place objects on the machine.
WARNING
Always use a suitable air extraction system during
dry machining.
Use a suction device with an extra-fine particle fil-
ter.
Avoid materials which damage your health.
Only use the machine when the working chamber
door is completely closed and undamaged during
machining.
Store the key for the emergency release in a place
where only authorized persons have access.
Do not circumvent or deactivate safety devices of
the machine.
Check the machine regularly for damage, espe-
cially the safety devices.
Have damaged safety devices repaired by autho-
rized service partners only.
Use only original manufacturer's equipment and
original spare parts in the machine.
Keep children and animals away from the
machine.
Do not remove the housing of the machine.
Operate the machine in "User" mode only unless
you have been authorized by Ivoclar Vivadent to
use other modes.
Even if you are an authorized user, use the
"Service Modes" only when necessary.
While in any "Service Mode": Do not reach
into the working chamber while the axes are
moving or during machining.
EN 3