Operating Regulations; Intended Use; Controlling The Machine Through Software; Maintenance And Cleaning - Ivoclar digital PrograMill Dry Instrucciones De Uso

PrograMill Dry – Operating regulations
3

Operating regulations

If you violate the following regulations, you may lose
your entitlement to benefits.
NOTICE
Machine damage if you violate these regulations
If you violate the following regulations, your machine
may get damaged and / or cause damage in the
surrounding area(s).
Thoroughly follow all instructions and information
in this section.

Intended use

The machine and the manufacturing software have
been designed for the commercial processing of
approved dental materials by specially trained
persons. The processed objects require additional
work before their use on patients.
Only process materials that you can select in the
manufacturing software.
Only use the machine in a commercial envi-
ronment.
Before creating jobs, verify if the objects being pre-
pared may be utilized at the place of use according
to local and / or national regulations or other autho-
rized organizations or entities (e.g. professional
associations, health authorities). In particular, verify
if the material is approved for the machined object
type and if the object type is designed in accord-
ance with applicable regulations. Neither the man-
ufacturing software nor the machine will inform you
about possible regulatory infringements, but will
execute jobs in accordance with the preferences
and materials set by the user.
Verify that each object type and each material in
your jobs are authorized manufacturing materials.
If mandated by local or national regulations, obtain
relevant authorization from the responsible organi-
zations or entities (e.g. professional associations,
health authorities).
Only import objects into the manufacturing software
which correspond to the object types that you can
select in the manufacturing software. While you
can import / manufacture any other objects as well,
neither the manufacturing software nor the
machine are designed for these other objects and
should not be used in this way.
Do not manufacture implants or parts of objects
that are designed to have contact with implants.
These parts include parts of two-part abutments

Controlling the machine through software

You control the machine through specially designed
applications which are supplied with the machine.

Maintenance and cleaning

Maintenance and cleaning is part of standard machine
usage.

Spindle

The spindle of your machine is a high-precision instru-
ment.

Unattended operation

If the machine runs unattended, the risk of material
damage is increased.
Operating Instructions: PrograMill Dry
Version: 2/19/2021
which contain the connection geometry for the
implant.
Always use the latest program version that officially
supports your machine.
Before installing or operating the machine, read
the documentation for the applications.
Ensure that your CNC computer meets all system
requirements.
Clean and maintain the machine as required. Only
then can the machine reach a long service life.
Do not use unbalanced tools at high rotational
speeds. Such an imbalance puts a great strain on
the spindle's ball bearings, which can cause the
bearings to be damaged.
When working in the working chamber, do not
apply manual pressure against the spindle.
Only allow unattended operation of the machine to
occur if the following conditions are met:
The national and local laws allow it.
n
The working chamber of the machine is com-
n
pletely clean.
Unauthorized users cannot access the machine.
n
The room in which the machine is located has an
n
automatic fire detection system.
EN 5