MSA Cairns 880 Instrucciones De Instalación página 11

(4) For helmet models 1010 and 1044, remove the
Defender visor to make assembly easier.
(5) Connect both snaps. Make sure that the snaps are
closed tightly and the snap covers point outward, away
from your skin.
a) Put the section of the chin strap with the QRB
b) Connect both snaps. Make sure that the snaps are
c) With the section of the chin strap with the Postman's
Note:
install the chin strap with the QRB on the right side of the
helmet and the chin strap with the Postman's buckle on the left
side of the helmet.
(6) Put the end of one side strap with the hook-and-loop
material through the loop channel on the left rear of the
impact cap.
(7) Connect the hook-and-look material.
MSA Cairns Helmets - Chin Strap Replacement Kits
through the outside of the bracket on the left side of
the helmet.
closed tightly and the snap covers point outward,
away from your skin.
buckle, do steps a. and b. on the right side of the
helmet.
To install the chin strap so the closure is on the left,
Installation
US
11