Auto & Sleep; Auto Mode; Sleep Mode - Winix PLASMAWAVE ZERO Manual Del Usuario

AUTO & SLEEP

1. Auto Mode

Enables auto operation based on the unit's air quality Particle Sensor.
Press the Mode button to select Auto mode.
①
ˍ The LED 'Auto' light will indicate when
Auto mode is activated, and operation
will begin.
Note

2. Sleep Mode

Press the Mode button to select Sleep mode.
①
ˍ The LED "Sleep" light will indicate when
Sleep mode is activated, and operation
will begin.
Note
English
ˍ When in Auto mode the fan speed is automatically adjusted
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced.
If the indoor air quality decreases, the fan speed will
automatically increase.
ˍ When Sleep mode is selected, the fan speed is automatically
set to Low. The fan speed can be manually changed by
pressing the Fan Speed button, changing the unit into
manual mode.
ˍ When Sleep Mode is activated, the Air Quality Indicator LED
light is disabled.
ZERO
10