Sparco CE R44/04 Manual De Instrucciones página 12

3.1 How to adjust the belts, headrest and seat positions
Important
The correct belt height of the shoulder belts are attained
when the belt disappears into the shell slightly above the
shoulder of the child.
Make sure that the shoulder belts fit properly over the
shoulders of the child.
3.1-1 Adjusting the belts
Loosen the harness straps by pressing the release button
and pulling the harness straps as far as you can.
Note! Do not pull the shoulder pads.
3.1-2 Twelve heights of the headrest
The headrest can be set at five different
heights in group 1 mode with the
shoulder belts axle in place. There are
seven additional positions in Group 2 & 3
mode once the shoulder belts axle and
harness straps have been removed.
Press the button on the headrest handle
on the top of the seat. It is important to
make sure the headrest fits properly to
the child's head.
3.1-3 Stepless adjustment device
The recline angles of the car seat can be
adjusted by reclining handle. (Only For
Group 1).
12
Securing your baby