Sparco CE R44/04 Manual De Instrucciones página 21

5.2 Refitting the 5-point harness system and cover.
After washing, place the cover
on the shell, pull the cover
around the adjusting device
down and insert the cover
around the edge of adjusting
device.
Pass the strap clip
through the strap clip
slot.
Then, pull both sides of
the cover as shown in the
picture and cover both
sides of the holders.
Pass the end of the
shoulder strap through
the harness slot, fix into
the shoulder strap axle,
and lock the shoulder
strap axle to the seat
shell.
Also put the end of the harness strap through the harness
strap slot and shell, then fix it into the strap yoke. Make sure
the seat straps can not be rotated.
Close the buckle, then fasten the cover all
around. Check that it works!
Care instructions
GB
ES
FR
IT
PT
DE
21