Sparco CE R44/04 Manual De Instrucciones página 19

Group 2+3 ISOFIX attachment + car belt installation
4.3 Installation of Group 2+3 for children whose weight
between 15-36kg.
Before the installation, please put away the
Harness system of child car seat.
Note: The child insert, Harness strap, Harness
buckle, Buckle pads & Shoulder pads should be
stored away safely for future use (see 5.1
Removing the 5-point harness system and
cover).
warning
Do not to use any load bearing contact points other than
those described in the instructions and marked on the
child restraint.
The belt must be routed as shown in the instructions.
Adjust the height of the headrest to suit
your child.
Push the ISOFIX connectors directly into
the anchorages until you hear an audible
"click" sound.
Place your child into the
car seat and pass the
belts through the bottom
of the armrest. Fasten the
car belt with an audible
"click" sound.
Make sure the Lap belt is stretched as low
as possible over the child's hips, within the
Belt guides and fastened into the buckle.
The Shoulder Belt must cross midway
between child's shoulder and neck.
GB
ES
FR
IT
PT
DE
19