Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Group 2+3 Car belt installation
4.2 Installation of Group 2+3 for children whose weight
between 15-36kg.
Before the installation, please put away
the harness system of the child car seat.
Note: The Child insert, Harness strap,
Harness buckle, Buckle pads & Shoulder
pads should be stored away safely for
future use ( see 5.1 Removing the 5-point
harness system and cover).
warning
Do not to use any load bearing contact points other than
those described in the instructions and marked in the
child restraint.
The belt must be routed as shown in the instructions.
Adjust the height of the headrest to suit
your child.
Put the shoulder belt through the
shoulder belt guide under the headrest.
Place your child into the car seat and
pass the belts through the bottom of the
armrest. Fasten the car belt with an
audible "click" sound.
Make sure the Lap belt is stretched as
low as possible over the child's hips,
within the Belt guides, and fastened into
the buckle. The Shoulder belt must cross
midway between child's shoulder and
neck.
18
Publicidad
Tabla de contenido
